Shopping Cart

Solite 8mm Custom Fire 2.0 Boots

  • You Here!
  • Home
  • Solite 8mm Custom Fire 2.0 Boots
product-details

Solite 8mm Custom Fire 2.0 Boots

$129.95 $64.98

Solite 8mm Custom Fire2.0 BootsNote: Sizes Shown are Mens sizesRecommended Water Temps: 32F+Sizing Tip: Order your regular shoe size or 1/2 size down. For example,...

Qty:

Product Category: Waterwear

SKU: V4675761204

Availability: In stock

Solite 8mm Custom Fire2.0 Boots

Note: Sizes Shown are Mens sizes

Recommended Water Temps: 32F+

Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a 10. Women should order 1-1.5 sizes lower to convert from Men’s sizing. So if you are a Women’s 8, order a Men’s 7. If you are a Women’s 8.5, also order a Men’s 7.

Size in Men / Womans

US Men 5 / Women 6.5
US Men 6 / Women 7.5
US Men 7 / Women 8.5
US Men 8 / Women 9.5
US Men 9 / Women 10.5
US Men 10 / Women 11.5
US Men 11 / Women 12.5
US Men 12 / Women 13.5
US Men 13 / Women 14.5

NOTE:If your feet are exceptionally narrow or low volume, you may want to size down even more.

The 8mm Fire gets theSolite 2.0technology upgrade for Winter 2023.The 8mm CustomFire 2.0 integrates Solite’snew 3-Point Strap withthe 2.0 Sole for precision fit, instant response, and enhanced durability and protection. Simply put, the8mm CustomFire 2.0 is the best cold-water boot in the world. Full stop.

Solite Custom Fire 2.0 Boot Features

3D Molded Natural Rubber Sole
Like all of Solite’s new 2.0 Series boots, the 8mm CustomFire 2.0 features a3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.

Custom-Fit 2.0 Thermofoam Sole with Round Toe Design
Solite’s patentedheat-moldable 2.0 Thermofoamsole has also been completely redesigned including a Round Toe design for max warmth. The Thermo Foam Sole is 8mm thick in the toes/heels for extra protection and 7mm elsewhere.

3-Point Strap with Floating D-Ring
Another Solite innovation, their3-Point Strapanchors under both the arch and heel on the inside of the foot, and under the heel on the outside of the foot. When the strap is tightened, the boot snugs up evenly under the arch and through the rear of the boot, providing instant response and slop-free fit for all arch and ankle profiles. Solite’s Floating D-Ringon the strap isn’t stitched in place, allowing it to “float” naturally to theoptimal position on your foot. Solite’s 3-Point Strapis also 100% Tatex-coated for extra durability andzero water absorption.

Thermal Rebound Lining from Top to Bottom
The 8mm Custom Fire 2.0 gets even warmer with the addition of Solite’sThermal Rebound internal liningand a matchingRound-Toe 1mm Neoprene Heat Booster Sock, also with Thermal Rebound lining.
These socks are a critical component of theSolite “system”, particularly in the frigid waters where the 8mm Custom Fire2.0s are used. Benefits of the 1mm Neoprene socks are numerous:

    • Add 5-10F warmth to the boots for longer sessions in frigid conditions.
    • Increase comfort with a soft, plush barrier between the foot and the Thermofoam sole.
    • Make the boots easy on/off with a low-friction outer surface.
    • Keep boots smelling fresh since the socks can be easily washed/dried separately.

    Tatex Flex-Spine
    Further fortifying the exterior is Solite’sexclusiveTatex Flex-Spine.The Flex Spine stiffens the back of the boot, actingas a shoe-horn for easy entry and also providinga sticky surface to grab your wetsuit leg and prevent flushing.The inside is lined with a plush quick-dry lining materialformax airflow, improving warmth and comfort.

      EZ-O Cuff with Overkill Seams
      Solite’s EZ-O Cuff designprovides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 5mm thickness. Since booties take serious abuse, Solitecut no corners on theirneoprene seam construction. Solite’sOverkill neoprene seamsare triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.

      Reinforced Stealth-Loop
      To ease on/off, Solite integrated theirlow-profileStealth-Loopin the heel. The Stealth Loop is laminated between the neoprene and Solite’s co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.

        Add a Review

        Your email address will not be published. Required fields are marked *

        Related Products