Wing Foiling Boom-Mounted Adjustable Reach Easy Transfer

Ride Engine RE Adjustable Wing Boom Harness Line

Dial in your preferred harness-line length for a natural reach and reliable connection to your wings boom.

The Ride Engine RE Adjustable Wing Boom Harness Line is designed specifically for wings equipped with a continuous boom. A hitch-style attachment makes the line easy to install and transfer between compatible wings, while the webbing pull-tab provides infinite adjustment between 35 and 60 cm. Adjust it to match your reach, stance and harness-hook position, then fine-tune the setup as conditions or equipment change.

• For Boom-Equipped Wings
• 3560 cm Adjustment
• Infinite Length Adjustment
• Webbing Pull Tab
• PU-Coated Line
• Hitch Boom Attachment
• Easy to Transfer

Why Youll Love This Wing Boom Harness Line

Fine-Tune Your Reach

Adjust the harness-line length anywhere within its 3560 cm range to suit your arm length, harness-hook height, stance and preferred riding position.

Quick Pull-Tab Adjustment

The integrated webbing pull tab makes length changes straightforward, allowing you to experiment with different settings until the hook engagement feels natural.

Easy Wing-to-Wing Transfer

The hitch-style boom attachment allows the line to be installed or moved between compatible boom-equipped wings without a complicated mounting system.

Made for Boom Systems

Unlike harness lines intended for separate handles or dedicated attachment loops, this model is optimized to connect directly around a continuous wing boom.

Key Features

Infinite Adjustment

The adjustable design is not limited to a few preset positions. Choose any suitable length between 35 and 60 cm for a personalized boom-to-hook distance.

Webbing Pull Tab

A dedicated webbing tab provides a clear grip point for shortening or lengthening the harness line during setup.

PU-Coated Harness Line

The working section uses a PU-coated exterior rather than leaving the line material exposed, creating a clean contact surface for harness-hook engagement.

Hitch Boom Attachment

The line secures around the boom with a hitch-style connection, making installation and removal simple while allowing the mounting position to be adjusted along the boom.

Wide Adjustment Range

The 25 cm adjustment range accommodates different riders, harnesses, hook heights and boom positions without requiring multiple fixed-length lines.

Quiver-Friendly Design

Riders using several compatible boom-equipped wings can transfer the line and readjust its length rather than permanently dedicating it to one wing.

Benefits of an Adjustable Wing Harness Line

More Comfortable Hook Position

Correct harness-line length helps the hook meet the line without excessive reaching, crouching or pulling the boom toward the rider.

Reduced Arm Load

Once properly adjusted and hooked in, a wing harness line allows the riders harness to carry part of the sustained wing load during longer reaches.

Consistent Powered Stance

A well-positioned line can help the rider settle into a repeatable stance instead of relying entirely on the arms to maintain boom position.

Adaptable Between Setups

The adjustable range makes it easier to compensate for differences in boom diameter, wing geometry, harness-hook height or personal preference.

Adjustment Range

Setup guidance: There is no single correct harness-line length for every rider. Begin with a conservative setting, test the connection on land and confirm that you can hook in and unhook naturally while maintaining full control of the wing.

Compatibility

Designed for Wing Booms

This harness line is optimized for wings that use a continuous boom and provide suitable space for a hitch-style attachment.

Confirm Your Boom Layout

Before installation, confirm that the wing manufacturer permits a harness line to be wrapped around the boom and that the selected position does not interfere with normal hand placement.

Not a Handle-Specific Line

This model is not designed specifically for separate soft handles, rigid handles or webbing attachment loops. Riders using those systems should choose a compatible handle-mounted wing harness line.

Harness Required

A compatible wing-foiling harness and harness hook are required to use the line. The wing, boom and harness are not part of this harness-line listing.

Basic Setup

Attach to the Boom

Secure the hitch attachments around suitable positions on the wing boom, following the wing manufacturers recommendations.

Find the Balance Area

Position the line where the wing feels balanced while powered and where the attachment does not obstruct your normal front- and rear-hand positions.

Adjust the Length

Use the webbing pull tab to select a length between 35 and 60 cm. The harness hook should meet the line without forcing an unnatural stance.

Test Before Riding

Load the line gently on land, inspect both hitch connections and practice hooking in and releasing before entering the water.

Product Details

Inspection and Safety

• Confirm that both hitch attachments are correctly secured before every session.
• Inspect the PU coating, line and adjustment webbing for cuts, abrasion or excessive wear.
• Verify that the line does not restrict access to the boom or normal hand movement.
• Practice hooking in and disengaging on land before using the line on the water.
• Make sure the selected length permits immediate unhooking when the wing is depowered.
• Replace the line if any structural damage or significant wear is visible.

Frequently Asked Questions

What wings is this harness line designed for?

It is optimized for wings equipped with a continuous boom. Confirm that your boom and wing manufacturer permit a hitch-style harness-line attachment.

What is the adjustment range?

The harness loop can be adjusted continuously between 35 and 60 cm, allowing the rider to fine-tune the distance between the boom and harness hook.

Can it be moved between wings?

Yes. Ride Engine specifically designed the hitch attachment for easy installation and transfer between compatible boom-equipped wings.

Will it work with separate wing handles?

This model is optimized for a continuous boom rather than separate handles. Choose a handle-compatible harness line unless the wing manufacturer specifically approves this attachment method.

Why choose an adjustable line?

An adjustable line lets you tune the hook-in reach for different riders, harness-hook heights, stances and wing setups instead of relying on one fixed length.

Does this include a wing harness?

No. This listing is for the adjustable boom harness line. A compatible wing harness and harness hook are required separately.