Navisafe Portable Navilight 2NM – TriColor w/Bendable Suction Cup Mount [305KIT2]

Portable Navilight 2NM – TriColor w/Bendable Suction Cup MountThe Navilight Tricolor 2NM – US Coast Guard approved for 2 nautical miles includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is battery operated, uses super bright LED light, is water proof, floats and attaches almost anywhere through its double magnetic mounting system.The green as well as the red lights show an unbroken light over an arc of the horizon of 112,5. The white Sternlight shows an unbroken light over an arc of the horizon of 135. All lights work independently, in a combination of all three or red/green together.Examples of usage:*Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGsOn a power-driven vessel of 12M or more in length but less than 50M in length:As green or red sidelightAs sternlightOn a power-driven vessel of less than 12M in length:as green or red sidelightas combined green / redas sternlightOn a sailing vessel underway:as green or red sidelightas sternlightOn a sailing vessel of less than 20 meters in lengths as backup light:Tricolor lantern at or near the top of the mastSpecifications:USCG Approval, 2 Nautical Miles5 Modes: Tricolor Masthead light (135 white, 112,5 red, 112,5 green), BiColor side light, red side light, green side light, white SternlightFloatable, waterproof (20M) and air-tightIncludes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securingPowered by three AAA batteries (not included)Size: H = 35mm, Diameter = 68mmWeight (net): 118gModes / approximate burn time:16 green / red / white LED, 360 TriColor lantern / 12hrs10 green / red LED, 225 Bi-Color sidelight / 20hrs5 green or 5 red LED, 112,5 sidelight / 38hrs6 white LED, 135 Sternlight / 32hrsBendable Suction MountDesigned to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.Examples of Usage:Navigation lights should be mounted so that they are not covered by the vessel’s superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:The outboard engineThe steering console, the windshield or any place on the hull where the lights are seen bestOn canoes and kayaks with a smooth and flat surfaceSpecifications:Secure suction cup baseQuick release suction capBendable shaft moves through 180Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfacesSize: L = 68mm, H = 157mmWeight (net): 80gWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:Lens Color: White/Red/GreenVisible Range (Miles): 2nmHousing: BlackVoltage – Input Range (Volts): 3 AAA Batteries (Not Included)LED: YesBox Dimensions: 2″H x 4″W x 7″L WT: 0.75 lbs